Installation Guide

 

How to cut WPC Panels, Acoustic Wood Veneer Wall Panels, and  Exterior European Siding Wall Panels,

We recommend a circular electric saw to cut through the panels.  Cut from the back side of the panels.

How to install Panels

There are three different options for installation depending on the panel type:

 

1. For Interior WPC Panels

Gluing straight onto the wall and using metal brackets provided:

Liquid Nails (glue) or similar glue is recommended for this along with a few metal brackets.

 

2.  For Interior Acoustic Wood Veneer Panels

Screwing directly into the wall:

The panels can be screwed directly into the wall through the acoustic felt.  Using black screws for the black backing felt option.   

We recommend a minimum of 9 screws per panel with intervals across the width and 24” intervals down the length of the panel.  We would also recommend that you use liquid nails (glue) along with the screws.

If installing into ceilings, make sure they are screwed into ceiling joists.

 

3. For Exterior European Siding Panels

We would recommend screwing the panels directly through stucco to furring strip.  If there is no stucco, use moisture barrier on top of the plywood sheating, then install the panels.